Aldera Graphics
Custom Boat Registration Numbers Vinyl Decal Letters and Numbers Custom Marine Boat Jet Ski Kayak Sticker Decals- Set of 2
Custom Boat Registration Numbers Vinyl Decal Letters and Numbers Custom Marine Boat Jet Ski Kayak Sticker Decals- Set of 2
Regular price
$9.90 USD
Regular price
Sale price
$9.90 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
Custom Boat Registration Numbers Vinyl Decal Letters and Numbers Custom Marine Boat Jet Ski Kayak Sticker Decals- Set of 2
DETAILS:
- Each order includes 2 identical decals - One for each side of the boat/vessel.
- The decal is sized to meet state requirements for font, size, and spacing. It will be 3" tall as required by state laws, and length will be approximately 18 inches. Font will match the listing pictures.
- Our custom vinyl decals are made from Oracal 651 vinyl and have an expected outdoor life of 6+ years! Our decals are perfect for use as a car decal, wall decal, laptop sticker, or on any other smooth surface you would like it on. If you do not see the color you're interested in below, message me and we can make a custom order with any of my available color stock.
Application Steps: (Professional Installation Recommended)
1. Clean the application surface with soap and water or rubbing alcohol (70% isopropyl alcohol). Area must be dry before application. Do not use chemicals or cleaners with water repellent properties.
2. Squeegee the decal on a flat surface to assure it is stuck to the transfer tape and ready for install.
3. Hold up the decal to the desired location. Then put a piece of masking tape down the middle of the decal. The tape should start above the decal and go all the way down through the center and below the decal.
4. The masking tape will be used as a hinge for installation. Carefully peel back transfer tape with the decal on it from one side of the decal left or right. Hold the transfer tape back while you tear or cut away the backing paper.
5. Carefully lay the transfer tape back down to your application surface starting from the center and applying out-words using light pressure with your squeegee from middle to outside.
6. Remove the the masking tape. Repeat step 4 and 5 for the other side of your decal completely removing the backing paper with this final side. Then firmly squeegee your entire decal from the middle to the edge.
7. Now that your decal is installed with the transfer tape still on top. Slowly peel back the transfer tape from a corner of your decal holding the transfer tape as flat and low as possible for easiest application.
8. Enjoy your perfectly applied background-less decal for a clean professional appearance.
DETAILS:
- Each order includes 2 identical decals - One for each side of the boat/vessel.
- The decal is sized to meet state requirements for font, size, and spacing. It will be 3" tall as required by state laws, and length will be approximately 18 inches. Font will match the listing pictures.
- Our custom vinyl decals are made from Oracal 651 vinyl and have an expected outdoor life of 6+ years! Our decals are perfect for use as a car decal, wall decal, laptop sticker, or on any other smooth surface you would like it on. If you do not see the color you're interested in below, message me and we can make a custom order with any of my available color stock.
Application Steps: (Professional Installation Recommended)
1. Clean the application surface with soap and water or rubbing alcohol (70% isopropyl alcohol). Area must be dry before application. Do not use chemicals or cleaners with water repellent properties.
2. Squeegee the decal on a flat surface to assure it is stuck to the transfer tape and ready for install.
3. Hold up the decal to the desired location. Then put a piece of masking tape down the middle of the decal. The tape should start above the decal and go all the way down through the center and below the decal.
4. The masking tape will be used as a hinge for installation. Carefully peel back transfer tape with the decal on it from one side of the decal left or right. Hold the transfer tape back while you tear or cut away the backing paper.
5. Carefully lay the transfer tape back down to your application surface starting from the center and applying out-words using light pressure with your squeegee from middle to outside.
6. Remove the the masking tape. Repeat step 4 and 5 for the other side of your decal completely removing the backing paper with this final side. Then firmly squeegee your entire decal from the middle to the edge.
7. Now that your decal is installed with the transfer tape still on top. Slowly peel back the transfer tape from a corner of your decal holding the transfer tape as flat and low as possible for easiest application.
8. Enjoy your perfectly applied background-less decal for a clean professional appearance.
Shipping & Returns
Shipping & Returns
- FAST FREE SHIPPING
- Please Contact Us if you have any issue
-
Free Shipping
Almost all of the orders will be shipped the same or next business day(MON-FRI)
We are a reliable US company.
Most of our items will be shipped out via Fedex, USPS or UPS ,it depends to the total weight of the package.
Generally the delivery time is 2-7 business days within US.
We will update the tracking number once your item is shipped.
-
Return Policy
Please Contact Us if you have any problem with your products or shipping